The Ultimate Guide To accurate 2495 reloading data

The Ultimate Guide To accurate 2495 reloading data

Blog Article

So in the complete 1350fps HS shell load, three hundred-mp is kind of a more sensible choice With all the every so a bit slower melt away rate to present a couple of more fps while in the load, even though inside the CF hulls at 1200fps, better off Along with the 296/H110 that has the slightly faster burn off amount to maintain the powder burning a contact cleaner as a substitute.



What I would like to grasp is beneath what conditions the force spikes were being recognized. Was it as the plastic 410 wads became really hard with the cold? Has anybody experimented with it within the Hornet starting with 2400 data?

Accurate Powders is a company that surely life as many as its name. The complete line of smokeless powders for handguns, rifles, and shotguns is engineered and lab-analyzed to maximize precision and overall performance.

I am even now loading the aged style Winchesters while, have not needed to vacation resort to the HS yet. Located a DEAL on about 15 flats of these two or three yrs in the past, and purchased all of them. I've only been utilizing the new types for competition, but I will be functioning out quickly.

Plainly when I'm crimping the shell, it goes in way much too deep and also the crimp does not completely crimp. Therefore, the lead falls out of your shell. Are you aware what I can perform to correct this.

The rest of the powders for 410 loads, have a burn off velocity of around 295, and just finish up burning up the hulls immediately to begin with, and won't ever have the ability to obtain the 1350fps ahead of the ammo goes more than strain.




So 296/297 at 1200fps leaves many unburnt powder while in the bore, though the faster/higher working strain loads genuine ends up with considerably less unburnt powder inside the bores isntead.

So If the not going to ream the shot bushing and just let it throw 214grs of shot, then up the powder bushing to some .300" ID bushing during the HS loads. This extra very little little bit of powder will give accurate 2 the shell the desired quantity to fill it entirely, Therefore the shot will not rattle after crimp.

Powder would seem a bit filthy and maybe burns up the hulls a tad quicker, I think (however very easily get 5 reloads with no far too much close inspection and sorting-some very last more time but want near glimpse after a couple of reloads). I’m conservative to the reloads and dispose previously than lots of do I think. Crimps are good in 99% with the hulls even through several reloads. General I like it plenty of to maintain employing it.

As stated, the crimps on both 28 gauge and .410 bore STS hulls will grow to be unusuable soon after 5 or 6 reloads. If you can choose them up cost-free they're value applying awhile but they are not really worth paying out his explanation just about anything for.

three grains. Exact same batch of boolits showed considerably less force with 410 all through Sept./Oct. I never ever experienced the prospect to utilize it inside the cold of the Winter season though. I basically liked it in excess of 2400 since I could squeak out a lot more velocity before leading would set in...

I just employed my very last pound of Alliant 2400. The only thing that I can find accessible which includes any semblance of a slow burning pistol powder is Alliant 410.




Secondly, the perspective that Lil Gun kills hull existence. I get various reloads with Lil Gun in AAHS hulls. I also like 296/H110 - but just expressing, Lil Gun is a great powder in addition. And it patterns effectively in my gun - together with any .410 powder.

"Be who you might be and say what you're feeling, simply because individuals that head Really don't issue, and those who issue don't head."